1. Paper quality
The paper can be white or colored. In order to ensure smooth feeding, the paper must be cut cleanly and accurately. You may find that some cheap paper is not precisely cut. The size of the paper may deviate from the size declared on the package by 2-3 mm. Similarly, the cheap paper may be dusty. The above problems should be avoided
2. Paper weight
When printing, the paper must pass through a precise paper path. So paper that is too light or too heavy may refuse to enter the printer. Therefore light or heavy paper is usually not suitable for most printers. Will cause frequent paper jams. Most laser printers are designed to use paper weighing approximately 70-90 grams per square meter, or 20-24 pounds in U.S. units. Some laser printers use 60 grams per square meter of paper, but this is an exception rather than a common phenomenon.
3. Paper condition
All paper must be kept clean, damp paper cannot be fed correctly, and may be slanted or folded in the paper path. Print quality on damp paper is usually poor. On laser printers, wet spots may appear fuzzy (or not visible at all). In all cases, the paper should be insulated from dust and dust. Dust and dust may contaminate the printer's mechanical devices. Please use new paper (especially after the printer has been idle for a long time).
4. Paper surface and curl
All paper has a natural tendency to curl slightly, because the paper is usually stored in a large paper roll before being cut. The direction of curling (the opposite side of the printing surface is preferred) is generally marked with an arrow on the paper packaging. Most laser printers require the paper to be placed with the curled side up (printing on the other side), which can reduce the occurrence of paper failure and paper jams.
Anhui Yongbang Paper plastic Products Co., Ltd. is a private enterprise which is specializing in paper and plastic products processing and household paper selling.