Release paper can be classified as plastic release paper and nonplastic release paper, and silicone release paper and nonsilicone release paper can also be classified as release agents.
Because there are paper hairs and chemical fibers on the surface of the paper mold, the amount of coating must be enough to ensure that there is no penetration point, that silicone oil is not easy to penetrate into the paper, and that there is no poor separation.
Generally, the amount of coated paper is 18 grams per square meter. Suzhou Jiateng supplier has already guaranteed 12-12 grams per square meter, which is close to the coating statistics of overseas technical equipment.
For the release paper used in the production line, its support force should be symmetrical, not very large or very small.
The paper feeding organization should have adjustable supporting force equipment, which can keep the supporting force of the paper industry moving at a uniform speed.
The film release paper is divided into single and double.
Usually single and double-sided release paper is single-coated, perhaps double-coated single and double-sided release paper, because the release surface coating is too thick is usually 30g, the release surface is usually thinner 16g, so the release paper is flatter.
The release paper is widely used in people's daily life and industry, which can not only improve the application frequency of release paper but also reduce the cost of commodity production.
Also do not use a release agent.
For example, the label printing factory will be in the area where there must be a layer of varnish, will also have the necessary ability to work, perhaps to the characteristics of strong adhesive is too weak.
Otherwise, in fact, the ability to work out of the model is futile.
In addition, the release paper produced by using some special super glue must be customized.